solid poly Wheels

Castersupply.com ^{^{Phone: (585) 697-0053 Fax: (585) 697-0071
E-Mail:}}^{^sales}^{^{r@castersupply.com}}

Economy Section: Solid Urethane Wheels

DUROMETERS LISTED 60 AND 75 D

60 DUROMETER

TEMPERATURE RANGE: - 40 F T0 180 F INTERMITTANT. HIGHER RANGES AVAILABLE ON SPECIAL ORDER.
HARDNESS: 60 DUROMETER ON D SCALE
TENSILE STRENGTH: 8,300 LBS P.S.I.
TEAR STRENGTH: 135 LBS PER INCH
ELONGATION: 320% AT TEAR
CHEMICAL RESISTANCE: HIGHLY RESISTANT TO MOST CHEMICALS AND SOLVENTS, ALSO TO WEATHER , WATER AND OILS.
COLOR: 60 DUROMETER BURGUNDY . OTHER COLORS AVAILABLE UPON REQUEST.
OPTIONS: WHEELS WITH 1 1/2 AND 2" TREAD WIDTH MAY BE FURNISHED WITH A LUBE FITTING IN HUB. SOME WHEELS LISTED MAY BE FURNISHED WITH A V - GROOVE IN TREAD FOR USE ON ANGLE TRACK. PLEASE CALL FO RFURTHER INFORMATION.
CAPACITY: CAPACITY IS BASED ON DYNAMIC LOADS AT SPEEDS OF 2 TO 4 MPH AT INTERMITTENT USE

60 DUROMETER POLYURETHANE:
Wheel	Width	Hub Length	Bore or Axel	Bearing	Cap	Approx. Weight	Wheel	Price
Dia	Inches	Inches	Size	Type	Lbs	Pounds	Number	Each
3	15/16	1 5/16	1/2	Delrin	150	0.3	60-304-08	call
	1 1/4	1 1/2	1/2	Roller	300	0.4	60-3001-08	call
	1 1/4	1 1/2	1/2	Delrin	300	0.4	60-3004-08	call
3 3/4	1 7/8	2 1/4	3/4	Roller	600	1.0	60-37521-12	call
3 3/4	1 7/8	2 3/16	3/4	Delrin	600	1.0	60-37524-12	call
4	1 1/4	1 1/2	1/2	Roller	300	0.6	60-4001-08	call
	1 1/4	1 1/2	1/2	Delrin	300	0.6	60-4004-08	call
	1 1/2	1 5/8	3/4	Roller	500	0.8	60-4011-12	call
	1 1/2	1 7/8	3/4	Delrin	500	0.8	60-4014-12	call
	1 7/8	2 1/4	3/4	Roller	600	1.0	60-4021-12	call
	1 7/8	2 3/8	3/4	Delrin	600	1.0	60-4024-12	call
5	1 1/4	1 1/2	1/2	Roller	300	0.8	60-5001-08	call
	1 1/4	1 1/2	1/2	Delrin	300	0.8	60-5004-08	call
	1 1/2	1 5/8	3/4	Roller	500	1.0	60-5011-12	call
	1 1/2	1 7/8	3/4	Delrin	500	1.0	60-5014-12	call
	2	2 1/4	3/4	Roller	700	1.3	60-5021-12	call
	2	2 3/8	3/4	Delrin	700	1.3	60-5024-12	call
6	2	2 1/4	3/4	Roller	900	1.5	60-6021-12	call
6	2	2 3/8	3/4	Delrin	900	1.5	60-6024-12	call
8	2	2 1/4	3/4	Roller	1000	2.5	60-8021-12	call
8	2	2 3/8	3/4	Delrin	1000	2.5	60-8024-12	call

TEMPERATURE RANGE: - 40 F T0 180 F INTERMITTANT. HIGHER RANGES AVAILABLE ON SPECIAL ORDER.
HARDNESS: 75 DUROMETER ON D SCALE
TENSILE STRENGTH: 5,375 LBS P.S.I.
TEAR STRENGTH: 163 LBS PER INCH
ELONGATION: 240% AT TEAR
CHEMICAL RESISTANCE: HIGHLY RESISTANT TO MOST CHEMICALS AND SOLVENTS, ALSO TO WEATHER , WATER AND OILS.
COLOR: 75 DUROMETER RED . OTHER COLORS AVAILABLE UPON REQUEST.
OPTIONS: WHEELS WITH 1 1/2 AND 2" TREAD WIDTH MAY BE FURNISHED WITH A LUBE FITTING IN HUB. SOME WHEELS LISTED MAY BE FURNISHED WITH A V - GROOVE IN TREAD FOR USE ON ANGLE TRACK. PLEASE CALL FO RFURTHER INFORMATION.
CAPACITY: CAPACITY IS BASED ON DYNAMIC LOADS AT SPEEDS OF 2 TO 4 MPH AT INTERMITTENT USE

75 DUROMETER POLYURETHANE:
Wheel	Width	Hub Length	Bore or Axel	Bearing	Cap	Approx. Weight	Wheel	Price
Dia	Inches	Inches	Size	Type	Lbs	Pounds	Number	Each
3	1 5/16	1 5/16	1/2	Delrin	175	0.3	75-304-08	call
	1 5/16	1 5/16	1/2	Ball	175	0.3	75-307-08	call
	1 1/4	1 1/2	1/2	Roller	350	0.4	75-3001-08	call
	1 1/4	1 1/2	1/2	Delrin	350	0.4	75-3004-08	call
	1 13/16	2	5/8	Roller	500	0.7	75-3021-10	call
	1 13/16	2 3/16	3/4	Delrin	500	0.7	75-3024-12	call
4	1 1/4	1 1/2	1/2	Roller	350	0.6	75-4001-08	call
	1 1/4	1 1/2	1/2	Delrin	350	0.6	75-4004-08	call
	1 1/2	1 5/8	3/4	Roller	550	0.8	75-4011-08	call
	1 1/2	1 7/8	3/4	Delrin	550	0.8	75-4014-08	call
	1 7/8	2 1/4	3/4	Roller	650	1.0	75-4021-12	call
	1 7/8	2 3/8	3/4	Delrin	650	1.0	75-4024-12	call
5	1 1/4	1 1/2	1/2	Roller	350	0.8	75-5001-08	call
	1 1/4	1 1/2	1/2	Delrin	350	0.8	75-5004-08	call
	1 1/2	1 5/8	3/4	Roller	600	1.0	75-5011-12	call
	1 1/2	1 7/8	3/4	Delrin	600	1.0	75-5014-12	call
	2	2 1/4	3/4	Roller	800	1.3	75-5021-12	call
	2	2 3/8	3/4	Delrin	800	1.3	75-5024-12	call
6	2	2 1/4	3/4	Roller	1000	1.5	75-6021-12	call
		2 3/8	3/4	Delrin	1000	1.5	75-6024-12	call
		2 1/4	5/8	S.P. Ball	1000	1.5	75-6027-10	call
		2 1/4	3/4	S.P. Ball	1000	1.5	75-6027-12	call
8	2	2 1/4	3/4	Roller	1200	2.5	75-8021-12	call
		2 3/8	3/4	Delrin	1200	2.5	75-8024-12	call
		2 1/4	5/8	S.P. Ball	1200	2.5	75-8027-10	call
		2 1/4	3/4	S.P. Ball	1200	2.5	75-8027-12	call
10	2 1/2	3 1/4	1	Delrin	1400	5.5	75-10254-16	call
10	2 1/2	3 1/4	1	S.P. Ball	1400	5.5	75-10257-16	call
12	2 1/2	3 1/4	1	S.P. Ball	1500	8.5	75-12257-16	call
	2 1/2	3 1/4	1 1/4	S.P. Ball	1500	8.5	75-12257-20	call
	3	3 1/4	1	S.P. Ball	1600	9.0	75-12037-16	call
	3	3 1/4	1 1/4	S.P. Ball	1600	9.0	75-12037-20	call

RADIUS TREAD 75 DUROMETER POLYURETHANE:
Wheel	Width	Hub Length	Bore or Axel	Bearing	Cap	Approx. Weight	Wheel	Price
Dia	Inches	Inches	Size	Type	Lbs	Pounds	Number	Each
6	2	2 1/4	3/4	Roller	1000	2.0	75R-6021-12	call
		2 3/8	3/4	Delrin	1000	2.0	75R-6024-12	call
		2 1/4	5/8	S.P. Ball	1000	2.0	75R-6027-10	call
		2 1/4	3/4	S.P. Ball	1000	2.0	75R-6027-12	call
8	2	2 1/4	5/8	S.P. Ball	1200	3.0	75R-8027-10	call
8	2	2 1/4	3/4	S.P. Ball	1200	3.0	75R-8027-12	call
10	3	3 1/4	1	S.P. Ball	1400	5.7	75R-10037-16	call

Wheels available with other size bearings and other types of bearings. Please inquire

60 DUROMETER POLYURETHANE:

75 DUROMETER POLYURETHANE:

RADIUS TREAD 75 DUROMETER POLYURETHANE: